universal_mounted_fntqtr_2048x1536_7f05dbfb-5d7e-4425-be8e-a672bc4719f6
universal_mounted_side_2048x1536_1d5b4f19-6b59-4be2-b0be-1b96c31fa853

Universal iLIFT Suspension Lift System

$2,900.00

    • $
    • $
    • $
Add to cart
Share :
SYSTEM DESCRIPTION

The iLIFT® system is the most advanced and robust suspension lift system on the market, with the unique capability to operate automatically, without the need for a driver to press a button to raise their vehicle.

By rapidly raising the vehicle manually or automatically, the lift system eliminates vehicle damage from scrapes on speed bumps, steep driveways, or from other road obstacles. Raising the vehicle also results in increase passenger mobility by allowing the driver and passenger to more easily enter and exit low vehicles.

The iLIFT Intelligent Suspension Lift System is unlike any suspension lift system on the market with these unique features:

High Performance Technology
Featuring patented actuator & seal technology - the iLIFT Suspension Lift System lifts your car faster with smaller, more compact components compared to any other system on the market.
Intelligent ECU with Wifi
The intelligent iLIFT ECU constantly monitors system parameters including system pressures to optimize system performance for your vehicle. Use wifi to easily configure your system wirelessly. Environmentally sealed enclosure means the ECU can be mounted in or outside the cabin.
Durability
The iLIFT Suspension Lift System uses high quality, OEM-grade components like the German-made OEM-quality air compressor.
Automated Sensors
The available patented iLIFT Automated Sensors allows the iLIFT Suspension Lift System to automatically lift your vehicle when an obstacle is detected.

INCLUDED WITH KIT
  • iLIFT Suspension Actuators
  • iLIFT Electronic Control Unit (ECU) w/ Wireless Configuration
  • iLIFT Manifold Control Unit
  • iLIFT Power Distribution Module (PDM)
  • iLIFT Wire Harness
  • iLIFT Air Tank with Integrated Mounting Bracket (mounted assembly) or separate Brackets for Individual Components
  • Activation Switch
  • High Quality Nickel Plated Fittings, Air Tube, & Air Tube Cutting Tool
  • iLIFT Suspension Actuator Installation Tool

COMPATIBLE SHOCK ABSORBERS

There are important considerations to determine if the iLIFT Suspension Lift System is compatible with your vehicle and suspension.

 

download iLIFT Universal Fitment Sheet

Straight Springs Required

The iLIFT Suspension Lift System actuators are designed for straight springs as shown. Factory style tapered springs and barrel springs are not compatible with iLIFT Suspension Lift System. Factory springs with a tapered or barrel shape can often be changed to a straight spring – however, this requires knowledge of the existing spring rate and may require a custom lower mount made to work with your shock absorber.


Clearance for Springs & Chassis

For the actuator to fit, it must allow the spring to fit into the actuator and the actuator must be able to be installed without hitting the chassis. The iLIFT actuator is compatible with springs with an inner diameter of 60-65mm – and is compatible with popular springs including 60mm, 62mm, 63mm, 65mm, and 2.5”. To determine your spring inner diameter, measure the inside of the spring with a caliper, or contact your coilover manufacturer. The spring’s outer diameter cannot exceed 3.6” (91mm).


Installation Height

The iLIFT Actuator adds only 5/8″ (16mm) of height to your spring. This requires a threaded body shock absorber with enough threads to lower the spring or modification of the lower mount to move the spring down 5/8″.


Compatible Shock Absorber Shaft Diameter

iLIFT Actuators are available for shock absorbers with 12mm, 12.5mm (1/2″), 13mm, 14mm, 15mm, 16mm, 18mm, 20mm, 24mm, and 25mm shaft diameters. Cone installation tools for installing the iLIFT actuator over shock absorber’s top threads and on to the shaft are available in common sizes. Custom sizes are available.


Top Mount Fitment

The shock absorber’s top mount must be able to accommodate the iLIFT Actuator. In addition, the iLIFT Actuator must remain parallel to the shock absorber, while the shock absorber must be able to pivot in the top mount to allow the suspension to pivot along the suspension’s movement. This may require a custom top mount or adapters in order to work with your existing top mount.



OPTIONS

Front Only or Front & Rear:
The iLIFT Suspension Lift System can be configured to lift the front suspension or both the front and rear suspension. Lifting the front of the car protects the front bumper and spoiler – typically the parts most prone to damage. Cars with very low ground clearance, or with low rear overhanging diffusers and exhausts can further benefit from lifting both the front and rear.

Activation:
The iLIFT Suspension Lift System can be activated with a switch to raise and lower the vehicle (with either a factory switch or the included rocker switch). Optionally, sensors can be added to provide automated raising and lowering of the vehicle. This patented feature uses advanced proximity sensors that are constantly monitored by the ECU to raise the vehicle when an obstacle is detected. The vehicle will lower once it is detected that the obstacle has passed. This system is activated whenever the vehicle is driven under 25 mph. Automated systems can also be activated manually. Front systems include 4 sensors. Front & rear systems include 6 sensors (the rear pair can be installed along the side of the car for situations like when the vehicle is stopped over a speed bump).

Mounting Style:
Choose between an all-in-one mounted solution or separate individual components. The mounted solution includes a 1.25 gal air tank, air compressor, air control manifold, power distribution module, and ECU all in one compact assembly. For installations when separate components are required – the components are available individually. Separate components include 1.25 gal air tank with mounting brackets, air compressor with mounting brackets, air control manifold, power distribution module, and ECU. Click here for dimensions.

Additional information

Weight30 oz
Dimensions30 x 15 x 15 in
Year Range / Engine Type

2008-15 4.2L, 2010-15 5.2L

Front / Rear Kit Options

Front & Rear, Front Only

Activation*

Manual, Manual + Automated Sensors

Shock Absorber Type

Aftermarket, Factory

SKU: SYS-UNI Category: